Cutting techniques and installation
Complete House Building Services
If you want to live in a pleasant, comfortable and healthy home that is friendly to the surrounding environment and to your wallet, we offer complete house-building services, including designs for individual projects.
100% Ecological building
Technical consultation, including installation training
Common surface finishes used with Compressed agri-fiber panels are :
1. Interior thin layer of plaster . It is the standard and most common form of surface finish. A flexible adhesive reinforced with fiberglass mesh (gauze) is applied on the penetrated surface of the Ekopanely board and the prepared seams between the individual Ekopanely boards. Plaster, tiling, etc. can be applied directly onto this surface.
2. Exterior thin layer of plaster
3. Sprayed Finishes of all kind
4. Clay Plaster’s- This is one of our favourite finishes to apply as its natural, environmet friendly and non-toxic.
5. Cladding with Plasterboard panels usinplasterboard screws.
Cut-outs for electrical wiring
Cut the holes for electrical wiring boxes using a special jig saw drill 72 mm in diameter, which you can purchase from our firm. The 72 mm drilling hole is precisely prepared for the insertion of a universal box for hollow walls (type KI 68 L/1 or 2 or 3). Electrical boxes used must have minimum fire response Category E. This meets the standards for electrical wiring in Strawcture boards.
Work with an electric screwdriver or use a drill fitted with a screwdriver bit. Do not pre-drill! When installing onto a wooden structure, use 5×100 mm screws with an EP-P1 washer. Choose suitable torque to ensure that the washer does not tear the three-layer recycled cardboard. Use 4×50 mm screws to fasten the universal wall fitting clamp (UNI wall clamp).
There are no limitations on surface finishes for Strawcture boards.
Common surface finishes:
Interior thin layer of plaster The standard and most common form of surface finish. A flexible adhesive reinforced with fiberglass mesh (gauze) is applied on the penetrated surface of the Strawcture board and the prepared seams between the individual Strawcture boards. Plaster, tiling, etc. can be applied directly onto this surface. We will be happy to provide you with more information over the phone or via e-mail, using the contact details provided.
Exterior thin layer of plaster
The priority with exterior surface finishes is properly preparing the surface, the quality of the work, and especially the performance of the materials. For our system we recommend the Jubizol Diffu Exteriér system, for example.
For the base layer for tiling we use penetration, on which we apply a thin layer of adhesive reinforced with fiberglass mesh (gauze).
Glass textile wall covering
All that is needed to prepare the surface is to cover seams and of course apply penetration.
As with wallpapers, you just need to apply plaster sealer and fill the seams between the Strawcture boards using gauze. What happens next depends on the type of spray coating.
Clay plasters are becoming more and more popular with our customers. For this surface finish, follow the instructions of the manufacturer we recommend.
Cladding with plasterboard panels
This is another way of modifying Strawcture boards. A plasterboard panel can be securely attached to the straw core of the Strawcture board using suitable length plasterboard screws.
This type of surface is also simple. Just prepare a suitable grid for anchoring the individual planks.